JBL Clip 3 Buttons Guide: Button Functions, Descriptions, and Locations

JBL Clip 3 Buttons Guide: Button Functions, Descriptions, and Locations

Bluetooth Discovery Mode Button

There are two groups of buttons on the JBL Clip 3. In the group of two buttons on the side of the speaker, we have all round buttons. First, we have the Bluetooth discovery mode button, as pointed at by the green arrow in the next picture. Note the squiggly Bluetooth logo imprinted on the button.

With this wireless speaker powered on, press this button to place this Bluetooth speaker into discovery mode. When in discovery mode, the speaker transmits its name and other connection information over the Bluetooth airwaves. This allows other nearby Bluetooth devices to discover it and connect to it.

JBL Clip 3 waterproof speaker, showing its Bluetooth discovery mode button highlighted.

The Power Button

The Power button switches the JBL Clip 3 on and off. Note that there is a separate multi colored status lamp, on the top of the speaker, under the clip, that shows speaker status when the speaker is powered on.

JBL Clip 3 Bluetooth Speaker, showing its -Power- button highlighted.

Volume Down and Up Buttons

The JBL Clip 3 also features volume controls, located on the front of the speaker, in the second group of buttons. The buttons in the shapes of the minus and plus symbols, when pressed, lower and raise the output volume of the JBL Clip 3 by reducing or increasing the volume setting on the paired source Bluetooth device. See the volume buttons, pointed at by the green arrows in the next picture.

With the JBL Clip 3 paired and playing, press the minus shaped button to decrease audio output level from the speaker. Press the plus shaped button to increase audio output.

Note that these controls have no effect when the speaker is unpaired. Also, the volume setting may change from paired device to paired device. That is, each paired device remembers its own volume setting. So you may have to readjust the sound output when you unpair the speaker from one Bluetooth device and pair it to another.

Front top view of the speaker, showing the volume controls highlighted.

The Play-Pause Button

The Play / Pause button is shaped like a right-pointing arrow and is found in the front center of the JBL Clip 3 speaker, near the top, as pointed at by the green arrow we drew in, in the next picture.

How to Stop and Restart Music Playback

Press this to pause play. Press again to resume audio.

Note that this is not a mute button. That is, pausing playback in this way suspends sound playback on the source Bluetooth device to which the JBL Clip 3 is currently paired. So, you won’t miss any program material when you pause the speaker, as the source device (your phone, tablet, or computer) remembers where the content was paused. So it resumes playback at that spot when you press the play pause button again.

How to Bring Up a Voice Assistant

When paired with an Apple device, press and hold the Play / Pause button to get Siri’s attention. Note that Siri must be enabled on the source device (phone, tablet) for this feature to work.

Front view of the speaker, showing its Play-Pause button highlighted.

Move Ahead in a Playlist with the Play / Pause Button

Finally, you can skip forward to the next song in a playlist with the Play-Pause button on the Clip 3. As the song plays, do the following…

      • To advance to the next song, quickly press and release the Play-Pause button twice. Upon doing that, your source device advances to the next song in the current playlist.

https://tomstek.us/jbl-clip-3-buttons/

Komentar

Posting Komentar

Postingan populer dari blog ini

Hard Reset JBL Clip 3

Gambar
Hard Reset JBL Clip 3 How to hard reset JBL Clip 3 Learn  how to hard reset  JBL Clip 3. How to fix stuck JBL Clip 3. How to repair JBL Clip 3. Those few steps will show you how to factory reset JBL Clip 3. How to restore defaults on JBL Clip 3. First method: When JBL Clip 3 is turn on, press and hold the Volume Up Button and Phone Key together. After a few seconds, you should hear a loud sound, and the JBL Clip 3 light will start blinking in white color. JBL Clip 3 will turn off and your will need to power it on again. Fantastic! Now JBL Clip 3 is in pairing mode, and all settings are back to its defaults. https://www.hardreset.info/devices/jbl/jbl-clip-3/
Baca selengkapnya

Force Remove JBL Clip 3

Gambar
Force Remove JBL Clip 3 How to Force Remove JBL Clip 3 Sometimes  Bluetooth disconnection  of a device may  fail  due to an error. Being  unable to remove a Bluetooth device  may cause your appliance to always appear in  Windows 10  device list. Removing a failed device from Windows 10 may even fix issues with your JBL Clip 3. If removing your device from Windows is not working, it may be caused by a number of reasons. Here you can find five methods, that may help you force remove blocked devices.  Click to go to a different method: First method: Go to the Airplane Mode Second method: Remove from the device list Third method: Uninstall the device from the Device Manager Fourth method: Removal using the Registry Editor Fifth method: Restart Bluetooth Device Association Service First method: Go to the Airplane Mode Press Windows Key + I on your keyboard Open Network & Internet...
Baca selengkapnya

Reset your JBL Clip 3 speaker

Gambar
Reset your JBL Clip 3 speaker: Follow these steps to reset your JBL Clip 3 speaker: 1. Make sure your speaker is turned on 2. Hold down the ‘Volume+’ together with ▶️ ‘Play/Pause’ 3. Hold down for 2 seconds (the light should turn off) 4. The speaker will be turned off. 5. When the speaker will be powered back on it will automatically go into Pairing Mode Note: Remove the Clip 3 from your phone’s Bluetooth list before pairing again. Your JBL Clip 3 speaker is now reset to factory defaults! After you’ve reset your JBL Clip 3 speaker, you can begin using it again with its default settings. If you’re still having trouble, you may need to contact JBL customer support for further assistance or call JBL at: (800) 336-4525 https://www.leadsrating.com/smart-speakers/reset-jbl-clip/
Baca selengkapnya